Digital multimeter

Description:

This Digital Multimeter tester was designed for checking the operation of Power-Waves Magnetic devices.

The special BNC adapter supplied makes this Digital Multimeter Tester the ideal tool for checking the operation of all our Magnetic devices. It is possible that with the passage of time, wear, frequent and not always accurate use, an internal connection can break without anything being evident. In such case, the LEDs of the devices would continue to work, but there would be no emission of electromagnetic waves.

The best way to know that a Power-Waves Carpet, Coil or Magnetic Pen is operating properly is not an electromagnetic field measurement, which can be affected by the frequency in use and/or external interference, but by measuring the resistance of the windings. Performing this examination with the test leads supplied with the common multimeter is almost always very complicated and unreliable, for a variety of practical reasons. Now this operation can be simple and within everyone’s reach, thanks to this Digital Multimeter Tester equipped with a connector suitable for measuring cables with BNC plugs. Now verifying the correct operation of Power-Waves Magnetic devices will no longer be a problem.

LCD display 3 1/2 digits 15mm

Automatic indication of negative polarity

Positioning rotary switch

TECHNICAL DATA:

DC Voltage 200mV / 2V / 20V / 200V (± 0.5%), 600V (± 0.8%)

AC Voltage 200V / 600V (± 1.2%)

DC Current 20µA / 200µA / 2mA / 20mA (± 1.0%), 200mA (± 1.5%), 10A (± 3.0%) Resistance 200Ω / 2kΩ / 20kΩ / 200kΩ (± 0.8%), 2MΩ (± 1.0%)

Diode test – Continuity test,

Power supply: 9V battery

Equipped with:

– 9V battery (mounted)

– Shockproof protection

– Safety tips

– Adapter for BNC connectors

– Tester instruction manual

– Instruction manual for checking Power-Waves devices

Complies with IEC 61010 600V CAT II EMC and LVD standards